broken washing machine problems

Basic Washing Machine Problems & Solutions

We give you the best way to handle Basic Washing Machine Problems and the best solutions to the problems

Washing Machine problems & solutions – A broken washing machine may be the start of a hygienically troubled house or business. Washing Machines Break due to many reasons. When a washing machine breaks, the issues can be isolated and a solution found. We have compiled a list of the most possible washing machine failure instances and the most appropriate remedy procedures. Read on…

broken washing machine problems
broken washing machine problems

Washing machine does not work and makes no noise

  1. Check that the washing machine is plugged in securely
  2. Check the circuit breaker or fuse box
  3. Test the outlet for current
  4. Check that the water supply valves are turned on
  5. Inspect the filter screens
  6. Test for overheating
  7. Test the water level switch
  8. Test the timer control
  9. Test the lid switch
  10. Test the water inlet valve
  11. Inspect the water pump
  12. Test the centrifugal switch
  13. Test the motor

Washing machine does not work but it does make noise

  1. Check that the water supply valves are turned on
  2. Inspect the filter screens
  3. Test for overheating
  4. Inspect the water pump
  5. Test the water inlet valve
  6. Test the motor

No water is entering the wash tub

  • or no hot water
  • or no cold water
  1. Check that the water supply valves are turned on
  2. Inspect the water supply hoses for kinks
  3. Check the filter screens
  4. Test the water level switch
  5. Test the water temperature switch
  6. Test the timer control
  7. Test the water inlet valve

The water fills the wash tub too slowly

  1. Check that the water valves are turned on full
  2. Check the water pressure at the tap
  3. Check the filter screens
  4. Test the water inlet valve
  5. The tub does not fill with enough water
  6. Test the water level switch
  7. Check that the drain hose is positioned roughly as high as the top of the inner tub

The water overflows the wash tub

  1. Test the timer control
  2. Test the water level switch
  3. Inspect the air tube for damage
  4. Test the water inlet valve

Water drains out during the wash or rinse cycle

  1. Check the drain control lever
  2. Test the drain control coils
  3. Check the cam bar
  4. Test the timer control
  5. Wrong temperature of water is used
  6. Water supply hoses may be reversed
  7. Hot or cold water supply valve may be turned off
  8. Water supply hose may be kinked
  9. Check water inlet valve

Water drains out while it is filling

  1. Check the drain hose; it should be at least as high as the top of the wash tub, about 38 inches.
  2. The drain hose must sit loosely in the house drain. Do not seal the air gap around the drain hose or a siphon will occur.
  3. Check the drain control lever
  4. Test the drain control coils
  5. Check the cam bar

Water drips into the wash tub when the washing machine is off

  1. Replace the water inlet valve

Water does not drain out of the wash tub

  1. Inspect the drain hose for kinks
  2. Test the timer control
  3. Test the lid switch (some models)
  4. Inspect the water pump
  5. Inspect the drive belt (belt drive only)
  6. Inspect the motor coupler
  7. Water is leaking onto the ground
  8. Inspect the water supply connections
  9. Inspect the drain hose
  10. Inspect the water pump
  11. Inspect outer tub for cracks or corrosion
  12. Inspect the tub seal
  13. Inspect the tub bearing

Agitator does not move

  1. Test the lid switch
  2. Inspect the motor coupler
  3. Inspect the drive belt (belt drive only)
  4. Inspect under the washing machine for soot (clutch)
  5. Test the motor
  6. Inspect the pulley
  7. Test the transmission
  8. Inspect the agitator
  9. Inspect the pump coupling
  10. Test the water level switch

Agitator movement is weak or moves in only one direction

  1. Inspect the agitator
  2. Inspect the motor coupler
  3. Inspect the drive belt (belt drive only)
  4. Inspect under the washing machine for soot (clutch)
  5. Test the motor
  6. Inspect the pulley
  7. Test the transmission
  8. Inspect the pump coupling

Drum does not spin

washing machine drum does not spin
washing machine drum does not spin
  1. Test the lid switch
  2. Test the timer control
  3. Test the centrifugal switch
  4. Test the water level switch
  5. Inspect the motor coupler
  6. Inspect the drive belt (belt drive only)
  7. Inspect under the washing machine for soot (clutch)
  8. Test the motor
  9. Inspect the pulley
  10. Test the transmission

Washing Machine Repair

Clothes are too wet after spin cycle

This may be a spin problem or a drain problem

Drain:

  1. Make sure the drain line is clear
  2. Check the drain hose for a partial blockage
  3. Inspect the water pump

Spin:

  1. Test the lid switch
  2. Test the timer control
  3. Test the centrifugal switch
  4. Test the water level switch
  5. Inspect the motor coupler
  6. Inspect the drive belt (belt drive only)
  7. Inspect under the washing machine for soot (clutch)
  8. Test the motor
  9. Inspect the pulley
  10. Test the transmission

Cycle does not advance

If the washing machine fills with water and begins agitating, but the timer does not advance, the timer probably needs to be replaced. If the timer does not advance while the washing machine is in a spin cycle, the timer probably needs to be replaced. If the timer does not advance during the rinse cycle, check whether water has filled the tub, if not, it is likely cold water related. Check the cold water supply valve, check the supply hose for kinks, check the filter screen and check the water inlet valve

Washing machine has Burning or electrical smell

washing machine burning smell sparks fire electric problem
washing machine burning smell sparks fire electric problem
  1. Unplug the washer
  2. Locate the source of the odor then read the instructions in the related section

Foul or stale odor coming from washing machine or clothes

  1. Check that the drain line is clear
  2. Check the drain hose for kinks or blockages
  3. Check pump for blockages
  4. Check for buildup of soap in the outer tub
  5. Check for article of clothing stuck in the outer tub

Washing machine is Noisy or vibrates too much

  1. Balance the load
  2. Level the machine
  3. Inspect the water pump for a blockage
  4. Inspect the coupling
  5. Inspect the transmission
  6. Adjust the drive belt tension
  7. Check the motor bearings
  8. Check the drum brakes

Washing machine Goes out of balance too often

  1. Balance the load
  2. Level the machine
  3. Inspect the water pump
  4. Clothing is damaged
  5. Inspect agitator for cracks or rough spots
  6. Inspect for rust spots

About Author

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

hello
error: Content is protected !!